PMDC MOTORS 55-56-57-58 FROM 60 TO 150 WATTS
These DC motors are supplied in 12 or 24 Vdc.
Its main application is in air conditioning and heating transportation vehicles, they are used in continuous service in blowers or fans systems.
It is possible other applications such as servomechanisms, rural use machines, machine tools, and traction in general.
According to other needs can be supplied at different voltages indicated.
They are manufactured in many sizes, from 60 to 150 watts of power output shaft.
Features:
Toty enclosed, non ventilated (IP-40), epoxy paint finish, injected caps.
Ferrite ceramic magnets , laminated armature suitable for static systems work with speed control PWM.
SAE1040 steel shaft mounted on b bearings self-lubricating .
Class F insulation.
Oversized brushes for long life, external brush access for easy inspection and replacement.
Optiony providing fully internal brushed, or ventilated endshield (IP-20).
Performance Curves:
Figure 1 s the characteristic curves of permanent magnet motors, the data for each model listed in table1. The nominal values are set for self-ventilated motors for continuous duty for other operating conditions are recommended to consult with our technical staff.
Pm: Mechanical Power on Shaft.
Un: Nominal Voltage.
In: Nominal Current.
nn: Nominal Speed.
Tn: Nominal Torque.
n0: No load Speed.
Ta: Starting Torque.
Ia: Starting Current.
Table1 - Available Models:
Model | Nominal Values | |||||||||
Pm | Un | In | nn | Tn | n0 | Ta | Ia | Long L | Weight | |
Watt | Volt cc | Amper | rpm | Nm | rpm | Nm | Amper | mm | Kg | |
551201 | 60 | 12 | 7 | 2500 | 0.22 | 3200 | 1.5 | 40 | 111 | 1.7 |
551202 | 60 | 12 | 6 | 2000 | 0.26 | 2800 | 1.3 | 27 | 111 | 1.7 |
551203 | 60 | 12 | 7 | 2800 | 0.19 | 3500 | 1.5 | 48 | 111 | 1.7 |
551204 | 100** | 12 | 13 | 3000 | 0.33 | 3500 | 1.7 | 55 | 111 | 1.7 |
551205 | 90* | 12 | 12 | 5000 | 0.16 | 6100 | 1.3 | 70 | 111 | 1.7 |
551206 | 100** | 12 | 12 | 4000 | 0.24 | 4800 | 1.8 | 70 | 111 | 1.7 |
551207 | 40 | 12 | 5 | 1500 | 0.27 | 1800 | 1 | 16 | 111 | 1.7 |
551211 | 30 | 12 | 4 | 1200 | 0.2 | 1800 | 0.6 | 10 | 111 | 1.7 |
552401 | 60 | 24 | 3.5 | 2500 | 0.24 | 3000 | 1.7 | 22 | 111 | 1.7 |
552402 | 60 | 24 | 3.5 | 2000 | 0.26 | 2600 | 1.6 | 18 | 111 | 1.7 |
552403 | 60 | 24 | 3.5 | 2700 | 0.21 | 3300 | 1.9 | 27 | 111 | 1.7 |
552404 | 100** | 24 | 6 | 3300 | 0.33 | 4000 | 1.8 | 28 | 111 | 1.7 |
552405 | 90* | 24 | 5 | 4500 | 0.2 | 5000 | 2.2 | 46 | 111 | 1.7 |
561201 | 75 | 12 | 9 | 2000 | 0.38 | 2600 | 3 | 60 | 132 | 2.2 |
561202 | 75 | 12 | 9 | 2500 | 0.28 | 3200 | 3 | 85 | 132 | 2.2 |
561203 | 120* | 12 | 12 | 4500 | 0.24 | 5300 | 1.8 | 77 | 132 | 2.3 |
561204 | 150** | 12 | 14 | 3000 | 0.44 | 3800 | 2.9 | 85 | 132 | 2.3 |
562401 | 75 | 24 | 4.5 | 2000 | 0.38 | 2500 | 3 | 32 | 132 | 2.2 |
562402 | 75 | 24 | 4.5 | 2500 | 0.28 | 3000 | 2.7 | 36 | 132 | 2.2 |
562403 | 120* | 24 | 6.5 | 4800 | 0.25 | 5300 | 4 | 78 | 132 | 2.2 |
562404 | 150** | 24 | 9 | 3500 | 0.4 | 4000 | 3.5 | 64 | 132 | 2.2 |
571201 | 100 | 12 | 11 | 2000 | 0.45 | 2300 | 2.5 | 60 | 142 | 2.4 |
571202 | 100 | 12 | 11 | 2500 | 0.35 | 2800 | 2.5 | 84 | 142 | 2.4 |
571203 | 120 | 12 | 13 | 3000 | 0.36 | 3600 | 2.5 | 75 | 142 | 2.5 |
572401 | 100 | 24 | 5.5 | 2000 | 0.45 | 2500 | 3.5 | 36 | 142 | 2.4 |
572402 | 100 | 24 | 5.5 | 2500 | 0.35 | 3000 | 3.5 | 45 | 142 | 2.4 |
572403 | 120 | 24 | 6.5 | 3000 | 0.36 | 3700 | 3.5 | 58 | 142 | 2.4 |
572406 | 150* | 24 | 9 | 3500 | 0.36 | 4000 | 4.5 | 90 | 142 | 2.4 |
581201 | 150 | 12 | 17 | 2000 | 0.7 | 2600 | 3.5 | 95 | 163 | 2.9 |
581202 | 150 | 12 | 17 | 2500 | 0.55 | 3200 | 3.5 | 95 | 163 | 2.9 |
581203 | 150 | 12 | 17 | 1800 | 0.8 | 2200 | 2.9 | 56 | 163 | 2.9 |
582401 | 150 | 24 | 8 | 2000 | 0.7 | 2700 | 4.9 | 54 | 163 | 2.9 |
582402 | 150 | 24 | 8 | 2500 | 0.55 | 3300 | 4.4 | 65 | 163 | 2.9 |
582403 | 150 | 24 | 8 | 1800 | 0.7 | 2400 | 4.6 | 49 | 163 | 2.9 |
* ONLY FOR INTERMITTENT DUTY - **ONLY VENTILATED
Technical download:
Download: M55_2.pdfDownload: M55_2Englisf.pdf